| The Andra Ocean Guard WTR is a rugged and powerful wave recorder developed based on the Ocean Guard platform.It can be used for self-confidence measurement of waves, tide levels, and temperature.At the same time, the instrument can also be used as a platform to expand to add other measurement parameters (such as CTD, sea current, dissolved oxygen, turbidity). |  | ||||||||
| Features | |||||||||
·Measurement interval between 2 seconds and 2 hours is optional ·Ocean Guard visualization software ·Optional RS422 communication, real-time XML format data output ·Can be used for both seawater and fresh water ·A color touch screen board based on Windows system can easily configure the instrument parameters without connecting to a computer ·Output parameters: pressure, temperature, tide level, specific wave height, maximum wave height, average period, maximum period, energy wave period,Original measurement data across zero cycles, slopes, sea condition irregularities, pressure and water temperature | |||||||||
SeaGuard WTR uses a silicon pressure sensor 5218 to measure waves and tides, and the pressure measurement is obtained by temperature compensation of seawater measurement data through an advanced digital signal processor. | |||||||||
| SeaGuard WTR works by fixed installation, installation on shallow water seabed, or on a fixed structure in the water. It is typically used for measurement of port waves and tides, shipping weather forecasts, climate research, etc.The recommended installation depth of the wave tide meter is 6 to 15 meters.The tide is measured as the average of the hydrostatic pressure over a period of time (10 seconds to 8 minutes, set by the user), and the data update time is 2 seconds to 255 minutes.Wave measurements are measurements of a pressure time series over a period of time (64 seconds to 17 minutes, set by the user), and the data update time range is 2 seconds to 255 minutes. | |||||||||
| SeaGuard WTR has two battery compartments that can be used for long-term deployment and can use Andra real-time data acquisition software for real-time data acquisition.The Marine Guardian Tide Gauge can be equipped with a conductivity sensor to calculate salinity, density and sound speed. | |||||||||
Technical parameters | |||||||||
 | |||||||||
| Note: Indicator parameters will change without notice. | |||||||||
| Origin:Norway AANDERAA | |||||||||