1,Glass syringe and micrometer syringe combination The new Burkard 1ml full-glass syringe is designed and produced in accordance with strict requirements.The plunger and the cylinder are installed separately and corresponding marks are also made.The installation standards of all syringes are in the form of Ruhr interface accessories, and are widely used in research fields such as laboratories, medicine, chromatographic analysis, etc. that require precise quantification. Just one screw is needed to fix it.The lightweight alloy sleeve has a beautiful appearance, ensuring that the syringe and the micrometer shaft can be completely fixed.The reversible single pivot designed to facilitate operation of both right and left hands makes this combination secure in any position. | |
2, manual micro pipette Variable micro pipette is equipped with a1ml Burkard syringe, usingThe Ruhr interface is installed, and the drip amount can be selected by sliding a selection control knob.Pipethave0.25, 0.5, 1, 2and 5µl to choose from.The applicator is made of iron-free material, and its components are extremely anodic or electroplated into a bright chrome alloy polishing table.The surface is assembled in a flexible manner, so that it can be clamped in any position during use.The 10 ml syringe and applicator can supply up to 50 µl drops. Technical parameters: Maximum sample loading of 1ml syringe: 500μl Total height: 9 cm (3½ inches) Total width: 12.7 cm (5 inches) Total length: 15.2 cm (6 inches) Bottom plate size: 10 x 15 cm (4 x 6 inches) Net weight: 1.35 kg (3 lb) Gross weight: 1.92 kg (4.2 lb) Optional accessories: equipped with stainless steel sleeve10 Beautifulsyringe |  |
3.Automatic micro-dip drip meter This is a low voltage automatic syringe.useBurkard 1 ml full glass syringe, the drop volume can be divided into ten levels ranging from 0.1 to 10 µl.Injection by using 10 mlThe dosage range of 1.0 µl -10 µl is available for the device and adapter.Use a control lever on the front of the instrument to quickly select each dose.By using foot or ring and fingeringSwitch, this microThe dropper can be used anywhere. Technical parameters: Maximum sample loading: 350μl Total height: 13cm (5 inches) Total width: 23cm (9 inches) Total length: 35 (14inches) Micrometer base size: 23 x23 x13 cm (9 x9 x5 inches) Injection needle size: 3/10 mm x 25 mm Net weight: 4.5 kg (10 lb) Gross weight: 6.5 kg (14.5 lb) Power supply: 240 V to 12 V or 110 V to 12 V Optional accessories: 10ml syringe and 10μl droplet adapter |  |
4, 900X precision micro pipette The instrument is electronically controlled by a low voltage micro-applicator.When using a Burkard 1 ml full-glass syringe, the drop volume can be adjusted within 1 to 100 microliters.Other similar syringes can only provide 10 times the amount.All-metal structure, suitable for long-term high-precision distribution.You can quickly select the distribution volume by using the finger wheel, increasing by 0.1 µl each time, and the maximum distribution volume can reach 999 µl at a time.Widely used in laboratory research and quantitative titration of chemical liquids. Features This device combination is compatible with computers. Can be operated by foot, manual or remote control switch The syringe is designed to move rapidly in both directions Safety devices can prevent damage to the instrument during use Technical parameters Maximum drug loading of 1ml syringe: 500µl Controller size (length × width × height): 33cm × 11.5cm × 14cm Injector size (length × width × height): 30cm × 10.6cm × 10.6cm Total weight: 1.47kg Power supply: 240V 50Hz or 110V 60Hz |  |